Filter By:
- Bottom Brackets (277)
- Brakes/Levers/Pads (784)
- Cables (265)
- Cassettes/Freewheels (167)
- Chainrings (377)
- Chains (172)
- Cranksets (371)
- Derailleurs (194)
- Show More Categories
- Forks (248)
- Handlebar Grips/Tape (420)
- Handlebars (341)
- Headsets (220)
- Pedals (469)
- Saddles (469)
- Seatposts (154)
- Shifters (147)
- Shocks (50)
- Stems (206)
- Tires/Tubes (1608)
- Wheels (3548)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: DIVINE

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: REVIVE / REVIVE 2.0
---2023-487125-3396898-1.png)
Service kit for 100 hr service (re-adjusting play and replacing wiper).
This Service Kit 1 only fits posts that have: "Wiper without spring"
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version. To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (no spring)
- 6x Glide pin
- 1x Lower bushing (grey, without line marking)
- 1x Foam ring
- 1x C-clip R12

BikeYoke Sanguine is designed specifically for the use in BikeYoke seat posts.
The formula reduces friction, ensuring fast action with minimal drag even in low winter temperatures below 0°C. Special additives help keep your post's o-rings and seals smooth and reduce wear.
- Suitable for all BikeYoke dropper posts
- Size: 250ml (lasts for several full services)

Comfort was at the forefront of our mind when we started developing The Cloud MK2 Seat. We wanted a saddle that offered comfort and resilient support for week long Enduro events.
- Dimensions: 132mm x 275mm
- Titanium rails, carbon base
- Weight: 235g

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point.
Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price.
The best of both worlds can exist.
- Nylon and Fibreglass Body
- SCM415 Cromo Axle
- All replaceable steel pins
- 16mm Profile, 1mm Dish
- 96mm x 102mm Platform
- Weight: 376g

Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date.
We did this by not only increasing the size of the pedal platform but also how concave it is. Furthermore, we reduced the diameter of the pins and added the most wear-resistant internals on the market.
From the outside to the inside, we've sweated the details of the MK5 to bring you the ultimate flat pedal.
- Weight: 379g
- Platform material: 7075 Alloy
- Profile: 15mm
- Platform: 100mm x 102mm
- Dish: 2mm (concave)
- Pin material: Stainless steel
- Pin width: 3.5mm
- Pin height: 4.5mm
- Axle Material: EN24T Steel
- Internals: 2 x Igus W300 bushings, single sealed bearing and inboard rubber oil seal

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

The Ride Wide Alloy Enduro Handlebars are the original and best wide bar.
It's the little differences that make it one of the most comfortable bars in its class. The backsweep and upsweep help the bar to the ultimate feel once tried always loved. As used by the Santa Cruz Syndicate riders Greg Minnaar, Jackson Goldstone, Nina Hoffman, and Laurie Greenland.
- 800mm width
- 9 degree backsweep
- 5 degree upsweep
- Suggested cut down marks
- Weight: 300g

As used by the Santa Cruz Syndicate riders Greg Minnaar, Loris Vergier and Luca Shaw. The Ride Wide Carbon DH Handlebars from Burgtec are the ultimate in control.
- Uni-Directional Carbon
- 800mm width
- 9 degree backsweep
- 4 degree upsweep
- Suggested cut down marks
- Weight: 280g

GXP Boost 3mm Offset Thick Thin Chainring. Awesome chain line plus awesome chain retention enough said.
- 12 spd Eagle compatible.
- Designed and tested in MTB heaven, the Peak District.
- Keeps your chain on!

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

When you've got to finish your bike off right.
The Burgtec Stem Spacers are the perfect finishing kit.

"Make a grip with the fussiest rider on the planet, you must be mad!!"
The Bartender Pro is the next level in grip design for Burgtec.
We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening.
- 31.5mm Diameter.
- 30A Rubber Compound
- Single Lock On

This tire is designed to shed mud and deliver traction on pavement and dirt. The Cultivator doubles as a solid tire for both the commuter and cyclocross rider.

Compatible with all Presta pump heads and most sealant injectors, Fillmore is backward-compatible with whatever you got, and forward-thinking in every way. Made for mountain, gravel and 'cross rims up to 28mm deep, Fillmore is one of those upgrades you don't know you need until you try it.
- Airflow - 3 times standard Presta air flow, easing tubeless tire set-up and reducing pumping force
- No clogging - Patented poppet-style design eliminates clogging by shielding air hole from contact with sealant
- Simplicity - Ability to inject sealant without removal of valve core simplifies maintenance
- Adjustable - Micro-air adjustment feature allows for precise trail-side pressure changes

- Pair of H-type disc brake pads with fins, for 1 caliper
- Available with resin or metallic compound
- Fits Shimano 4-piston calipers Saint BR-M820 and BR-M810, Zee BR-M640 & XT BR-M8020
- Ice Technologies fins & aluminum backplate cools down the brakes in use, which improves braking consistency and power and reduces brake fade during long, technical dowhnill stretches
- Longer lasting than D-type pads
- Includes spring and split pin

Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components.
- TY model comes with resin bracket and plate body for reduced weight
- Zinc-plated adjustment screws for corrosion resistance
- MegaRange compatible
- Includes frame hanger
- Maximum cog size: 34t
- Total capacity: 43t

Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set.
- OEM pulley set for XTR RD-M9000
- Sealed bearing guide & tension pulley
- Guide pulley with extra long teeth for increased chain control

- For MTB with lateral pull brakes
- Double digit activated lever
- Aluminium lever blade and collar
- Compatible with grip shifting systems

- Handlebar-mounted tubeless repair kit
- Discreet and neat finish, completely integrated inside the handlebar
- Anodized aluminum bar ends
- Tool-less expansion plugs fit internal bar diameters from 17.5mm to 21mm
- Easy to use: No need to dismount the tire
- Durable reparation of flats between 1 and 5mm
- Integrated holder for an additional chain link and a tubeless valve (link and valve not included)
- Includes tubeless plugs (3 x 2mm and 3 x 5mm), needle tool (reamer) and knife
- Weight: 75g

$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

$0.99
Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!
Page 1 of 348
Next page