Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Other

A neat little gadget, that is particularly interesting for anyone who likes to wrench on their bike.
Designed like an ordinary headset spacer, the Aimy slides onto the steerer tube and has a stainless steel bolt that clamps down so that the steerer tube cannot fall through your headset, once you take off your stem.
- Machined from aluminum
- Fits 1-1/8" steerer tube
- Thickness: 8mm
- Weight: 8g

Includes all hydraulic seals to perform a complete cartridge rebuild of your BikeYoke dropper post.
Compatible with: REVIVE / REVIVE 2.0
---2023-487127-3396900-1.png)
Service kit for 100 hr service (re-adjusting play and replacing wiper).
There are three different service kits for the REVIVE/DIVINE 30.9/31.6, depending on model year and version.
To determine the correct service kit for your post, please copy this link into your web browser:
https://www.bikeyoke.de/media/products/REVIVE%20service%20kit%20coding.pdf
Kit includes:
- 1x Wiper (with spring)
- 6x Glide pin
- 1x Lower bushing (grey, with line marking)
- 1x Foam ring
- 1x C-clip R12
---2023-487083-3396858-1.png)
This BikeYoke allows the use of a standard shock in your Specialized bike.
Stumpjumper 2010-2015
Includes:
- 1x BikeYoke SJ01
- 1x DU bushing
- 1x reducer
- 1x stainless steel bolt

These super tough axles are constructed to Fox's exact specifications and made from 7075 Aluminium.
Unlike any other fork axles on the market, these feature a unique double hex design. This includes the traditional 6mm that everyone is familiar with but with an added 8mm Allen key fitting as well. This feature makes removal much easier if the 6mm gets chewed up, over tightened or not removed for a long time.
Having an Allen key fitting instead of a QR also allows the use of a torque wrench so you can be sure your wheel is correctly tightened. This Axle also comes with a grade 5 titanium pinch bolt and backing nut to finish things off.
Clean, simple, and fast!
Replacement for Fox PN:
820-09-071-KIT / Service Set: 2021 36-38 15x110 KaboltX Pinch-axle Assembly
820-09-063-KIT / Service Set: 2020 FOX-Marzocchi 15x110 QR Adjust Axle Assembly
NOTE: This axle does not fit 2021+ 32 and 34. (Square Arch)

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.
Fits the following Santa Cruz bikes:
- 5010 V1, V2, V3
- Bronson V1, V2, V3
- Nomad V2.1, V3, V4
- Chameleon V5, V6, V7
- Heckler V7
- Heckler E-Bike V8
- Heckler MX E-Bike
- Bantam V1
- Blur TR V1.1
- Blur XC V2.2
- Blur LT V2.2, V2.1c
- Blur V3
- Highball V1, V2, V3
- Tallboy LT V1.1
- Tallboy V1.1, V2, V3, V4 (MY20 & MY21 only)
- High Tower V1 and V2(MY20 & MY21 only)
- High Tower LT V1
- Mega Tower V1
- And Juliana Equivalents
Exact Axle Length is 168.5mm x Thread M12 x 1.0mm pitch also fits other brands that use this size.

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. Dropout Bolt is also provided.
Constructed from 7075 Aluminium and made to the manufacturer's exact specifications.

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors.
Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again.
- Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm
- Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

Get that nice derailleur shifting smoothly and operating silently again with a Shimano Rear Derailleur Pulley Set.
- OEM pulley set for XTR RD-M9000
- Sealed bearing guide & tension pulley
- Guide pulley with extra long teeth for increased chain control

$0.16
Parts for repair and maintenance of DT Swiss hubs.
- DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders.
- All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

$1.00 - $18.00
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further.
- M4 x 24mm screw for that extra little push

$1.50
KMC 3/16" Master Link Chain Links
- For 3/16" chain, extra wide
- Extra-wide, for non-derailleur bikes: BMX, cruisers, etc
- Perfectly fits on KMC 415H & 415H-NP chains

$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$1.95
Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models.
- One size.
- Sold as a pair.
- Fits Ergon GA2, GA2 Fat and GA3 models only.
- Designed to fit Trail / All-Mountain MTB handlebars on the market today.

$1.95
Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models
- Right and Left soft plastic bar plugs.
- Sold as a set only.
- Fits most handlebars.
- Can be trimmed to fit various handlebar thicknesses.
- Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only
- Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only
Page 1 of 76
Next page