Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

BMX

$440.00
- Double Wall, 16T Freewheel Rear Wheel - Inverted Alloy V-Brake - GT Power Series Cr-Mo 3pc. Cranks - GT 33T Steel Chainwheel - GT 2.5" Smoothie Tires/ Cheat Code Saddle
$429.95
Park ready. The Fit PRK completes are purpose-built for aspiring park riders, with our nimble, quick-handling "Park" geometry. A super short 12.6? rear end & steep 75.3 degree head tube angle make spins faster, whips easier and the balance points, front & rear, quicker to find. Available in two different sizes, XS (20? top tube) and MD (20.5? top tube), the PRK bikes feature a low-profile frame, constructed with a chromoly front triangle for the most technical riding pursuits. Tight & right spec. like 8.7? rise bars, shorter 160mm 3-piece cranks and sealed bearings all around. Brakes are a key component for many park riders, so the PRK comes with our updated U-brake with a softer pull and a sealed detangler device to keep your bars spinning freely and your brakes at full power. Spin to win, the Fit PRK completes are ready to drop in.
$399.95 - $529.95
The Series One is where things get serious. With frame sizes to fit a wide range of riders and finishes to satisfy different tastes, the Series One has what it takes. Choose from SM (20.25? top tube length), MD (20.5? top tube) or LG (20.75 top tube) frame sizes to fit you and your preferences. Start with chromoly top and down tubes on our "Series One" specific geometry for control and stability on all terrains, from the skatepark, to the dirt to the streets.  Bolt-on a stable 33mm offset fork with a chromoly steerer tube to take the hits. The wheel set features alloy rims with a sealed cassette in the rear, with Fit 2.4? tires for a wide footprint. A Fit topload stem, Crossfit grips and an updated seat/post combo with more padding provide creature comforts. There's a Series One in our collection for just about everyone. Make your choice and take the ride.
$469.95
"Getting air" is what bicycle motocross is all about, and the Fit TRL completes are ready for pure BMX, right out of the crate. With longer 21? XL or 21.25? XXL frame options, you get a long & stable bike that's designed for full speed assaults on all terrains: Dirt, concrete bowls, pump tracks and everything else. A stable 74.5 degree head tube angle with a generous 33mm fork offset gives you control, with a slightly longer rear end to add stability and confidence to your session. A chromoly front triangle is a traditional configuration for strength and low weight, with big 9 X 29? bars and a Fit top load stem to improve control and reduce back pain. Sealed bearing hubs and bottom bracket for high speeds and low maintenance. Traditional details like chainstay mount U-brakes, a railed S&M seat/post and a tall 30/10 gear give the TRL a touch of mid-school soul. The TRL is ready to do it all.
$649.99
The new DK Sprinter Series bikes are designed for serious BMX racing at prices that will keep your budget on track. In terms of performance, quality, and value, you’ll be hard pressed to find better race bikes for the buck than the DK Sprinter series. - Sizing: 4' - 4'7" - Ages: 5 - 7 Specs: - Top Tube: 17.25” - Chain Stay: 12.125” - Head Tube: 72º - Seat Tube: 70º
$499.99
Ready to ride. The DK Swift series bikes are an affordable in-road to a life of BMX. The Swift series is sized to fit every rider in your crew. From the 18" Micro for the youngins to the Pro for full-sized humans, every Swift is set for the race track or the pump track, right out of the gate. Each Swift bike is built on a lightweight aluminum frame with race proven geometry, sized by model with proportionate handlebars, cranks, and gearing. The Swift Pro features a sturdy chromoly 3-piece crank for the bigger set, while the rest have 3-piece alloy cranks, sized accordingly. Alloy rims fitted with all-terrain tires put these bikes into motion and provide a smooth ride on any surface. All told, the Swift Series bikes are easy to ride, ready to race, and delivered at an unbeatable price. - Sizing: 4'8" - 5'5" - Ages: 9 - 11 Specs: - Top Tube: 19.5" - Chain Stay: 14.25" - Head Tube: 73º - Seat Tube: 69º - Cranks: Forged alloy 3-piece, 165mm - Sprocket: 42-tooth, alloy, 5-bolt chainring - Seat Post Clamp: Alloy - Weight: 20 lbs<
$554.99
A bike with plenty of opportunity, the Arcade really showcases the endless detail and unrivaled quality that we put into our bikes. This super-dialed bicycle rolls on SALT's super-wide 36mm Valon rims with sealed hubs, carrying a full assortment of nylon hub guards that allow you to have a solid and dependable set of wheels under you at all times. Available in both a 20.5" and a longer 21" option, the Arcade will give senior riders the ability to ride one of the most popular bikes in our line.
$529.99
One of the most anticipated bikes in BMX, the CRS is back for 2021 with even more bang for your buck. Now featuring a sealed front hub, this all-terrain slayer rolls smoother than ever. Packed full of aftermarket parts from ECLAT, including the Bios Pivotal seat and Pure seat clamp, the CRS looks and rides like a bike twice the price tag. The geometry has been tailored to allow for greater progression of the younger generation. The super-short 12.75" chainstays, 165mm cranks, and shorter 26mm fork give the CRS a snappy and agile ride that is perfect for learning and advancing. A bike truly built with vision, the CRS is unlike anything else.
$734.99
Built upon a frame of which most other aftermarket frames would be envious, the Crysis is wrapped in a generous helping of We The People parts, including the all-terrain 2.35" Overbite tires, Logic sprocket, and the Logic front load stem, new for 2021. The Crysis is available in 20.5" or 21" top tube sizes, both using our invest cast wishbone and taller 127mm head tube for a super clean and refined look.
$614.99
Based on the same bikes that We The People pro, Felix Prangenberg, rode last season, the Justice features revised geometry and a never before seen parts overhaul from We The People. Our new Activate tire, Paragon plastic guard sprocket, and Perfect grips make this new-school urban machine more stacked than ever before. Paired up with a shorter 22mm-offset fork and a full assortment of plastic hub guards, you'd be forgiven for thinking that you're riding a full custom build.
$384.99
The Sunday Darkwave frame is built out of 100% 4310 chromoly and features Sunday's signature dent-resistant wave down tube to give riders a little extra peace of mind when things don't go according to plan. It stays looking clean with refined details like an integrated seat clamp, tapered stays, and integrated chain tensioners. Removable brake hardware and gyro tabs are also available when you need them and disappear when you don't. - 100% 4130 chromoly frame - Broc Raiford signature geometry - Removable U-brake hardware and Gyro tabs - Integrated seat clamp - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it. - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.
$389.99
Jake Seeley's signature frame is designed to complement his progressive, technical street riding. The Street Sweeper evolves directly from Jake Seeley's original Broadcaster frame by using shorter chain stays, a steeper head tube angle, a taller bottom bracket and smaller hollow dropouts with integrated chain tensioners. Built with versatility in mind, the Street Sweeper features removable u-brake hardware and Gyro tabs. The frame's front triangle makes use of traditional round Nightshift style top and down tubes with proven internal gusseting. - 100% 4130 Chromoly Frame - Nightshift style, double-butted, top and down tubes with proven internal gusseting - Integrated seat clamp - Butted Seat Tube & Miter Cut Top Tube: The seat tube is where all three triangles of the frame meet and it is crucial to keep this tube strong - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. The are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in place as well as simplify wheel removal - Removable Brake Hardware: Refined removable brake mounts and cable channel improvements that provides benefits with or without a brake setup
$524.99
The Darko is a solid spec'd, vibrant bike for the new-school street shredder. The frame comes with fully removable brake hardware and the bars use the flangeless Radio XL grips, giving the Darko a sleek and modern look. A fat combo seat and shorter 13.2" chainstays finish off this incredible bike built for the streets.
$419.99
We've upgraded the frame on the Dice 20" with a full alloy 6061-T6 frame, making it one of the very first full alloy freestyle bikes ever made. Everything on this bike was picked to ensure that this bike has the right equipment to make those first steps in BMX as enjoyable as possible. The Dice has specific geometry making it perfectly suited for the younger rider. The frame uses a shorter 20" toptube paired with a shorter 13.2" chainstay. Featuring 25-9 gearing and tapered forks, the Dice is one entry-level machine that packs a serious punch for a lightweight contender.
$449.99
The Evol enters the scene with a fresh injection of new parts and flavor, making it a solid entry-level machine with everything you need to start making serious progress with your riding. A CrMo toptube, sealed and integrated headset, and mid-sized bottom bracket, along with details like the big logo Radio Rookie tires and oil slick sprocket, make the Evol something very special and unique.
$799.00
Tested on the track and designed in conjunction with a team with BMX race knowledge spanning 3 decades, Radio Raceline Helium frames are well thought out and powerful pure bred race machines. You'll find no gimmicks, no "goofy" tubing shapes or unnecessary features. These frames have been built from the ground up with race proven geometry and technology combined with clean, functional aesthetics designed to give you the holeshot out of the gate. Radio Raceline Helium frames are designed to feel comfortable, stiff and fast, exactly how a race bike should.
$389.99
The Revo line allows you to get your first taste of the BMX world on a solid and well-designed bike. We took extra care when hand-selecting the components on these bikes to ensure that they could be ridden straight out of the box and are simple to work on and maintain, but also easily upgradeable over time. Despite the low price-point, the Revo is packed full of great features like 25-9 gearing, tapered fork legs, and short/responsive pro-inspired geometry. Building on the Revo 20", the Revo 20" Pro adds a 3pc crank upgrade, making this machine even more dialed than ever before.
$484.99
The Saiko 20" has evolved into a low-slung 20" bike with shorter geometry, making it perfect for riders slightly too small for a full sized 20" bike, or just wanting a more nimble and responsive ride. The 19.25" toptube and 165mm cranks, paired up with the latest parts from Salt, make the Saiko a truly special bike unlike anything else.
$579.99
An elegant piece of craftsmanship, the Valac is built with a longer 20.75" top tube, 76-degree headtube angle, and a taller 9" bar, making it the perfect ride for the rider who's progressing to a bigger and better bike. With geometry taken from our aftermarket range and a set of wider Saltplus Burn tires, the Valac rides just like the bikes that the pro teams use. With fully sealed bearings throughout and a Salt Zion mid-load stem, the Valac is an eye-catching and dialed bike, built to shred it all.
$599.99
- 6061 aluminum alloy frame with reinforcing gussets at critical points - Single-speed drivetrain with flip-flop rear hub - Rear alloy linear-pull brake with 2-finger lever - Three-piece chromoly BMX cranks with 8-spline quad bearing BB - 24" double wall alloy rims with stainless steel spokes - 24 x 2.30" Vee Tire Co. Speedster tires - Black Ops SpecOp BMX handlebar with brace - Black Ops SpecOp custom BMX saddle with anti-slip surface - Frame Standover: 24.5" - Min Seat to Ground: 27" - Min Seat to Pedal: 23.5" - Bike Weight: 30 lbs - Rider Weight Limit: 250 lbs
$699.99
- 6061 aluminum alloy frame with reinforcing gussets at critical points - Single-speed drivetrain with flip-flop rear hub - Rear alloy linear-pull brake with 2-finger lever - Three piece chromoly BMX cranks with 8-spline quad bearing BB - 29" double wall alloy rims with stainless steel spokes - 29 x 2.30" Vee Tire Co. Speedster tires - Black Ops SpecOp BMX handlebar with brace - Black Ops SpecOp custom BMX saddle with anti-slip surface - Frame Standover: 29.5" - Min Seat to Ground: 32" - Min Seat to Pedal: 28" - Bike Weight: 30.5 lbs - Rider Weight Limit: 250 lbs
$399.99
The ALVX AF+ is the latest version of Alex Donnachie’s signature ALVX frame. Featuring the same super tech geometry and ultra short rear end, but now with an updated invest cast chainstay yoke which maintains the tire clearance as well as creating a more rigid rear triangle and it also looks pretty sick. - Invest cast chainstay yoke which creates more clearance for the tire for when your wheel is slammed, because this part is cast and heat treated it strengthens the rear end of the frame by stiffening it up - 7mm thick invest cast dropouts to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails,. The dropout is heat treated before welding making it extra tough with integrated chain tensioner bolts inside - Brake mounts: none - External gussets for strength - Sanko Japanese seamless 4130 chromoly
$399.99
BSD Freedom is Kriss Kyle's signature frame, designed to perform well on all terrain. This frame combines the stability of a low 11.5" BB, the responsiveness of a 75 degree head angle and the versatility of a short rear end. To create a stiffer rear triangle we've utilized an invest cast wishbone and invest cast seatstay bridge. - Constructed from Japanese Sanko seamless 4130 chromoly tubing, triple butted - Removable brake mounts, brake kit sold separately - Head tube and bottom bracket heat treated and CNC machined 4130 - Heat treated and investment cast 4130: chainstay wishbone, dropouts, and seatclamp - Frame weight: 5 lbs
$399.99
The Grime frame is the signature frame of Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5 headangle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tire clearance and a 9” standover.
$379.99
The Sureshot is designed with a more ramp/park/trails geometry than our other frames. Utilizing a low BB, longer rear end, mellower head angle and removable brake lugs, this frame is a true all rounder. - Tubing: Sanko Japanese seamless 4130 chromoly - Brake mounts: removable - brake kit available separately
Page 1 of 1