Brakes/Levers/Pads

BL-M6100 - Intuitive and powerful braking - Quicker brake engagement with shorter free stroke - Rider tunable and action-optimized cockpit - High-performance brake control - Additional contact point for a stiffer brake lever - 10 deg. rotation angle setting range for I-SPEC EV shifting lever BR-M6100 - Pre-assembled - One-way bleeding system - Superior modulation gives you the power you need at low weight - Quick piston retraction - Lightweight 2-piston disc brake caliper - ICE TECHNOLOGIES - Without rotor and adapter

The Rival 1 hydraulic disc brake offers optimized stopping power and modulation for road or cyclocross. Pair with a Rival 11-speed shifter for a 1x set-up, or use as a pair for a singlespeed HRD bike. The brake lever features the HydroR brake platform with revised ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. - Individual Reach Adjust - Forged aluminum disc caliper with steel-backed organic pads and steel hardware - Low hand force required - Fully sealed system for no contamination - Easy bleed access - Left-side lever

Cyclocross, adventure, or road—whatever your pursuit, the Force 1 HRD brake lever features our HydroR design, with superb ergonomics for better finger wrap. Enjoy seemingly effortless braking regardless of terrain or condition. Features - Lever body design offers improved finger wrap and improved comfort and control - Internals feature easy access to bleed ports - Master cylinder design featuring optimized pistons and seals for power and control - Flat mount caliper - Left-side lever

SRAM's left-side Rival 22 Hydraulic Disc Brake and Brake Lever is descended from their top-end RED road group and offer precise braking and shifting performance. The aluminum brake lever and shift paddle deliver smooth modulation and deft shifts while keeping the weight impressively low. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust. The forged aluminum disc caliper is optimized to give you the stopping power and modulation you need for road and cyclocross riding. A fully-sealed hydraulic system prevents contamination during muddy cross races and epic dirt-road slugfests. Once you experience the incredible ability of SRAM's Rival 22 Hydraulics, you'll never go back to rim brakes again! - Hydraulic Fluid Type: DOT - Hydraulic Hose Length: 950 mm - Pad Compound: Organic - Rear Der/Shifter Compatibility: SRAM Exact Actuation - Rotor Included: No

Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Shimano - XTR BR-M9000,BR-M9020,BR-M987,BR-M988,BR-M985 - XT BR-M8000,BR-M785 - SLX BR-M7000,BR-M675,BR-M666 - DEORE BR-M6000,BR-M615 - ALFINE BR-S700 - BR-RS785 - BR-R785 - BR-CX75 - BR-R515 - BR-R315 FSA - K-Force DB-TX-9000 - Afterburner DB-TX-9150 REVER - MCX1 Post Mount

With SHIMANO's SLR-EV dual symmetric pivot design, the short-arm DURA-ACE R9200 series caliper brakes employ twin bearings and a roller to realize greater efficiency and deliver superior modulation and stopping power. They are offered in traditional and direct mount options. - Exceptional balance of rigidity, weight and stopping power - Maximum tire size: 28C - Lightweight magnesium brake shoe holder

This individual left Microshift ADVENT brake only drop bar lever matches other externally-routed microSHIFT drop bar shifters for a clean aesthetic.

These powerful 4-piston brake sets instill greater downhill confidence and control with a 20% increase in braking power over current 2-piston BR-MT400 brakes. The BR-MT420 calipers feature consistent braking performance and reliable stopping power in all weather conditions. Additionally, they feature a sleek design inherited from MTB racing components.

Proven in World Cup racing, Shimano's Saint Disc Brake sits at the summit of DH brake tech. The post-mount caliper is equipped with four oversize ceramic pistons for serious power blended with stellar modulation. Heat is the enemy of any braking system, so Shimano uses ICE technology with finned brake pads and a longer banjo to dissipate heat more effectively. All this leads to a brake with reduced pad wear, that doesn't fade or squeal, and leaves you in total control.

- Designed for caliper & cantilever brakes - Aluminum/composite construction - 23.8/24.2mm clamp - Brake release - 320g pair - SHIMANO Equivalent BL-R400

Hope Disc Brake adaptors are CNC-machined and ensure a perfect fit with all Hope Brake sets. - CNC machined in Barnoldswick, England - Includes mounting bolts

RockShox Brake Post Kit for most RockShox forks. - Includes 2 posts & 2 washers

- Lightweight stainless steel rotor, Great for all-Mountain or enduro use - International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G

- Lightweight 2-piece alloy cartridge design - Advanced alloy rim braking compound provides superior performance in both dry and wet conditions - Fully integrated angle adjustment - Automatic toe-in alignment - Length of Pad: 70mm - Pad Color: Black - Hardware Color: Black - Post Orientation: Offset

Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: SRAM: - HRD - eTap HRD - Level Ultimate,TLM

XTR RT-MT900 rotors offer stable and versatile braking performance in the most demanding MTB conditions. - Center Lock design (alloy lockring included) - Incorporates Ice Technologies Freeza construction for superior heat dissipation - Compatible with both metal and resin brake pads

- Exceptional heat management - Rounded edge - UCI approved for road competition - Disc Diameter: 220mm - Hub Compatibility: ISO 6B - Disc Pad Type: Metal or Resin - Disc Technology: 2-piece design

Disc Brake Service Kit for Elixir X0/9 Trail A1 - Includes pistons, seals, guide pin, banjo, and bolts

- Capable of handling the higher average speeds and increased mass of trail ready E-MTBs. - G2 R lever with a powerful 4-piston caliper derived from the gravity-focused Code brakes.

Replacement disc brake calipers for Hayes Dominion hydraulic brake systems.

- V-Brake design - Cartridge type brake pads - Inner cable lead unit included - Adjustable linear springs on both sides - Longer brake arm resulting in a better spacing for mudguards

- Optimum heat dissipation - High durabilty - Wear indicators - 1.95mm thick - Rounded edge - UCI approved

DESCRIPTION The Box Three Brake is available in 85mm with short reach lever or 108mm with long reach lever. They include two-tone, dual-compound pads that feature a unique finned design that helps improve airflow. The Philips head tension screws aid installation and makes toe-in adjustments simple and easy. FEATURES - Cold Forged from 6061-T6 Aluminum - Up to 35mm of brake pad adjustment - Box Three™ Air Flow Brake Shoes w/ Dual Compound Pads - Brass bushings, Stainless Steel Hardware - Phillips head tension screw - 5mn allen key to secure cable on right arm

- A mountain bike specific rotor designed to improve brake performance while reducing noise and increasing heat dissipation - New brake track pattern for increased pad traction and recessed spokes with thermal dissipating paint - HS2 is more powerful, and quieter rotor with best-in-class heat management

The SRAM RED brakeset improves on all fronts: it’s lighter, more aerodynamic and leverages more braking power. What’s more, it features broader tire clearance. A classic made modern. - AeroLink arm amplifies braking power while reducing frontal area - Lighter, aero pad retainers carry SwissStop Flash Pro pads standard - Aero design extends to the shape of the indexed four-position quick release - Wider clearance for modern tires and wheelsets (up to 28c) - Updated finish to match new SRAM RED eTap AXS - Reach: Standard

Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation

The Dura2 insert is a newly designed road pad. The pad is thicker than the standard Dura type for longer life, has a 7.65 mm contact width for narrow rims and cut outs for reduced weight. - Water grooves - 7.65 contact width - Reduced weight - Rim Friendly Compounds

Braking can be fun by adding a pair of real Vans Brake Shoes. Available in assorted colors. Features: - Rim friendly compounds - Threaded steel post - Steel hardware Specifications: - Weight per pair: 56.9 grams - Overall length: 46.1mm - Pad contact width: 13.1mm

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g

With the evolution of disc brakes on time trial bikes, TRP saw the need for a high-performance hydraulic TT disc brake resulting in the all-new HD-T910. We took a unique approach to the time trial brake by combining speed and style which resulted in the TT Hydro. Initially, the lever was handcrafted from clay before being finished off in aluminum. This allowed our designers to offer maximum ergonomics and an elegant visual appearance. From there it was forged from alloy, given a replaceable rubberized grip, and finished off with a carbon lever blade. The lever is matched to a black flat mount caliper designed to offer controlled braking at any speed. The levers come in two widths for differing bar diameters: - For bars measuring a diameter between 22-24 mm: HD-T910 - For bars measuring a diameter between 24-25 mm: HD-T912 - HD-T910 (OD 22-24 mm) - HD-T912 (OD 24-25 mm) - Carbon Fiber Lever Blade - Forged Alloy Lever Body - TRP 2-Piston Flat Mount Caliper - Integrated and Replaceable Grip - Anodized Black - 5.0 mm High Quality Hose with 1900 mm length - Factory Pre-Bled with EZ-Plug System - Blip or Di2 Shifter Adapter Inserts Available - Top Loading Pad Design - 390g (front) - Minimum bar insertion is 55mm