12- to 24-Inch

If you load your bike with heavy cargo or need an extra bit of traction for an extended haul, the Tour Guide Tire is your beast of burden! Its shoulder-to-shoulder sipes, combined with a thick tread cap, and puncture protection equip this tire with reliability for conditions most cyclists would not attempt to conquer. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- New tread design, improved compound and quality workmanship - The Schwalbe One sets a new benchmark in terms of quality and performance

- Trails, corners, berms, tables, kickers and everything else that's fun to ride are where the NEW HANS DAMPF feels most at home. - Extended limits due to greater stability, durability and performance. - Semi-open block arrangement for excellent self-cleaning with low rolling resistance - Aggressive smaller shoulder blocks for grip and control on loose and loamy ground

Front and rear folding bead BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. The S-Spec version utilizes Tioga's thinnest sidewall for maximum suppleness and weight savings. - CYLEX 120 TPI superlight casing - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness - ISO diameter: 406mm

The Vault uses an all-condition tread pattern suitable for street, park and dirt riding. With a textured surface and slightly raised shoulder knobs, the Vault rolls fast without giving up traction. - Textured surface and slightly raised shoulder knobs for fast rolling and cornering traction

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead “Silkshield” protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

- Kenda model K50 - A good, basic repair tire

- Balloon tire with grooved tread - Large air volume for added shock absorption - Wire bead - Size: 24 x 2.125

- Park/street tire, with directionally grooved tacky tread - Wire bead - Available in three widths

Micro-knurled blocky tread suited for a wide variety of terrain from street and park to hard pack trails and more. - Street/park tire, tacky tread with tightly bunched knobs - Wire bead - Size: 20 x 1.95

- Entry-level BMX-style tire with sturdy casing for longevity - Wire bead

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 20 x 1 3/8

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 16 x 1.75

- Recreational tire with horizontal grooves for traction - Size: 24 x 1 1/4 - ISO 547

The Sunlite Revolotions is a street/cruiser tire with an all-around tread style. - Wire bead - TPI: 26

Sunlite's Street S-7 Tire is an urban tire with a raised center rib for reduced rolling resistance. - Size: 20 x 1-3/4 S-7 - ISO: 419 - Bead: Wire - PSI: 50 - Weight: 470g * not interchangeable with tires labeled "20 x 1.75"

- Wide fast-rolling street-style tread that extends all the way to the sidewall - Large channels and siping help evacuate water quickly and provide a plush smooth ride - Wrap-around tread extends into the side wall for predictable turning even when running low PSI - ISO: 406 - Bead: Wire - PSI: 20 - TPI: 30

- Urban tire with raised center for reduced rolling resistance - Size: 20 x 1 3/4 - ISO 419

Classic knobby BMX tread now available in multiple colors with skin sidewalls. - Wire bead - 30 TPI

- Slick center tread with continuous curved lines on each side of the outer tread surface - Perfect for old-school rides such as the Schwinn Stingray or new BMX bikes with a knack for old-school vibes

A highly versatile front and rear race tire option that strikes a balance between speed and control with Tioga's GripPod technology and Nano Knob tread design - CYLEX 120 TPI ultralight casing - PneuMax 110 PSI high-pressure inner coating - AvntGUARD cut protection membrane - UTC rubber compound - Grip-Pod system helps maintain traction when cornering - Chemical etching on center tread creates a fine texture for enhanced traction

Stare down rough terrain with this burly yet sleek tire. The Utility Player offers comfortable off-road exploration with modern, openly spaced treads and wide 2.25-inch casing. A broad spectrum of diameters gives you choice for fit. You still standing there? - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- An uncompromising tire for BMX race wins - Tubeless Ready technology reduces rolling resistance for optimal performance - The MICHELIN Pilot SX has been designed for extra grip while cornering, particularly on hard-packed or dusty terrain

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

The Current tire features a directional grippy tread pattern with good shape and tire width. It’s an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. - Grippy tread pattern - Affordable high-pressure tire

The Super Circuit tire has been designed to meet the demands of pro-level BMX racing and park/transition riding. Some of Odyssey’s most iconic tires have inspired the Super Circuit's all-new tread design, with a focus placed on its shallow, grippy tread block depth and K-Lyte Plus casing layup to save weight. The Super Circuit tire features a fast and smooth center tread, knurling on the side blocks, and it is offered in a competition-ready foldable bead option only. - Designed for pro-level racing and park/transition - Lightweight K-Lyte with kevlar bead - Shallow, grippy tread block depth for to save more weight - Directional tread pattern with smooth center tread - Micro-knurled side blocks

The Ground Control tire is such a great trail tire, we have adapted it for all sizes and ages. This tried-and-true design features CAD-engineered knob shapes, which strengthen the knob structure for optimal braking and traction, but it keeps the knob surfaces adaptable for the best possible grip on mountain trails. - Casing: 26 TPI - Bead: Wire - Compound: 60a - 20x2.35", 25~50 - 24x2.35", 25~50

The Mirage tire is built on the premise of a super-lightweight tire that was strong enough for the toughest street riders. The Mirage uses a high-performance 120tpi casing and a specially designed dual-compound tread that is smooth in the center, but with plenty of grip on the outer tread for traction and control while cornering and carving. The Mirage was also designed with street riders in mind and uses a full bead-to-bead "Silkshield" protection layer and a special outer ridge which acts like a bumper and prevents the sidewall getting damaged during grinds. - High-performance lightweight street tire - Dual-compound construction - Full-length "Silkshield" layer under tread and sidewalls for added protection - Specially designed tire tread with a smooth center tread for low rolling resistance and aggressive sides for traction and grip - Special outer line for grind protection - Made by Maxxis tires

- Freestyle BMX tire

Little ones who've always wanted to shred like World Cup racers can now do so with this 20- and 24-inch Renegade Sport. The new Renegade Sport mimics the tread pattern of Specialized's World-Cup-winning Renegade, with perfectly tuned knob heights for high speeds, plus cornering traction and braking control for more confidence out on the trail. - Casing: 30 TPI - Bead: Wire - Compound: 60a - 20 x 2.1"; PSI 35-65; approximate weight 570g - 24 x 2.1"; PSI 35-65; approximate weight 720g - Flat Protection: Flak Jacket